induro® Mix'n'Fill Filler

A cellulose-based binding medium for mixing with sanding dusts to produce a fast-drying filler for use in filling nail holes, splits/shakes and gaps between joints up to 5mm in width/depth.

Overcoatable with induro® XLO oils, and XL1XL2 and XLA waterborne flooring lacquers.

Mixing Guidelines

1 part binding medium : 1 or 2 parts clean sanding dust (80g - 120g sanding) to produce a smooth paste.

Application Guidelines

Preparation

Flooring should be clean, dry and sanded back to bare timber

Application

  1. the filler should be applied over the whole area using a trowel, scraper or other straight edged tool. Ensure that holes, shakes and gaps are completely filled
  2. allow to dry
  3. sand with 100g - 120g sanding paper
  4. repeat if required

  • Pack size: 5L and 25L
  • Mixing ratio: 1 part binder : 1 or 2 parts sanding dust
  • Dry time: 20 - 60 minutes depending on the mixing ratio, amount applied and the ambient conditions

Product Codes

2MF/104 induro® Mix'n'Fill

MSDS

Visit our Data Sheet page for access to all available data sheets.

Input your information below to begin download.