Pre-Catalyst Lacquer for Brushing

A pre-catalysed system specifically formulated for brush application. This range can be used over any of the recommended basecoats or coat-on-coat.

If recommended basecoats are in use, thin the Brushing Lacquer with Retarder Thinners up to a maximum of 5% by volume to allow better flow and wetting. 

Meets the requirements of FIRA 6250 for Horizontal Surfaces (excluding kitchen worktops) in General Use. Tintable with Morrells Light Fast Stains. Designed for application by mop or brush.

  • Pack size: 5L & 25L
  • Thinning: Maximum 5% by volume
  • Tinting: Maximum 5% by volume
  • Touch dry: 10 -15 minutes @ 18°C
  • Sandable: 40 - 45 minutes @ 18°C
  • Recoatable: 40 - 45 minutes @ 18°C
  • Packing: Overnight minimum, dependent on conditions
  • Coverage: 40m² per 5 litres dependent upon the size, orientation and surface quality of the item being coated
  • Typical finish: 2 - 4 coats at 75g/m² per coat coat-on-coat or over the recommended Morrells basecoat/sealer

Product Codes

9901/284 90% sheen
9702/254 70% sheen
9004/250 Pre-catalysed basecoat
9004/280 Pre-catalysed basecoat
2004/280 Cellulose basecoat
2007/000 Thinners
2007/200 Anit-chill thinners
2007/201 Retarder thinners

MSDS

Visit our Data Sheet page for access to all available data sheets.

Input your information below to begin download.